Mema Mobile 001

Our Mema Mobile turns and bobs, facing this way and then, changing expression, endlessly engaging. Create a feature under your existing light source – our mobile clips directly onto a standard GU10 down lighter spot.

R2,000.00

In stock

Category: SKU: MM-001

Additional information

Weight 0.3 kg
Dimensions 31 × 20 × 4 cm
Colours

Copper Pink, Royal Blue, Magenta, Pale Gold, Burnt Orange

Material

Anodised Aluminium Mesh

Shade Height

76cm

Shade Width

42cm

Shade Depth

22cm

Lamp Weight

0.14kg

Installation

Lamp Types
If a halogen bulb is used it is recommended to replace it with a LED bulb: 6-12 Watt, 24-36° beam angle, 2700 Kelvin- warm light with a ‘flat face’.

Hanging Your Mema Mobile
Identify the downlight you wish to hang the mobile from.
Please refer to this video: https://www.youtube.com/watch?v=USvLN6EDLk4 to learn about the different types of GU10/MR16 bulb attachments.

There are three general types of downlight attachments:

TYPE 1
Lamp/bulb is fixed from below by a support (could be a spring). Remove the bulb from the housing by removing its spring. Tie the mobile to the Mema Spring at your preferred height. Now place the Mema Spring below the bulb and then reinstate the original spring below the Mema Spring. The mobile is now hanging from the Mema Spring, supported by the downlighter spring.

TYPE 2
When the lamp/bulb is supported from below by a screw-in housing (see video link). Remove the housing and the bulb. Tie the mobile to the Mema spring at your preferred height. Now insert the Mema Spring from below and locate it inside the housing, then place the bulb on top of the Mema spring. Screw the housing with the bulb back into its original position. The mobile will now be hanging from its spring below the downlighter bulb.

TYPE 3
The lamp/bulb is attached from above. First remove the bulb from its base in the ceiling. Tie the mobile to the Mema Clip at your preferred height. Now slide the Mema Clip over the bulb, closing the third ‘finger’ over the bulb. The mobile is now secured to the bulb. (The mobile & cable hangs from the Mobile clip). Now replace the LED bulb back into place in the ceiling

Caution
ALWAYS HOLD THE MOBILE COMPONENTS ON THEIR OUTER RIMS OR WIRE HOOK AND DO NOT GRIP THE PRODUCT ON ITS MESH SURFACE.

Maintenance

To clean the mobile of loose dust or fallen articles, simply blow the individual components with a hairdryer on a medium or cool heat, blowing the dust outwards and away from the components. For heavier dust, use a spray bottle with 90% water mixed with 10% alcohol. Once you have sprayed the mobile with fine mist, blow dry with a hairdryer. The evaporating water loosens and carries the dust away.

If a stain is stubborn, use a small amount of acetone and clean gently with smooth cloth or small soft brush without exerting pressure on the mesh.

Downloads

Spec Sheet (PDF)

Installation Guide (PDF)