Petal 003

Three petal lamps, wired to one ceiling cup, becomes a chandelier. These lamps use G4 base LED lamps which create a ‘starlight’ effect on the metal textile surface.

R13,500.00

Available on back-order

Categories: , SKU: PET-003

Additional information

Weight 1.5 kg
Dimensions 65 × 36 × 9 cm
Colours

Bronze, Charcoal, Copper Pink, Pale Gold, Silver White

Material

Anodised Aluminium Mesh

Cup Diameter

200mm

Shade Height

90cm

Shade Width

43cm

Shade Depth

6cm

Lamp Weight

0.7kg

Dimmable

No

Usage

Indoor Use Only

Globe Type

G4

Luminaire Standard

IEC 60598-1:2008 CLASS II : IP20 G4 BASE Bulb 2-4Watt Power supply/transformer 220 Volt included* *Can be modified for 110V

Power Supply

Transformer Supplied

Voltage

12

Installation

Please refer to the ceiling plan for your installation arrangement.
The lamps should be installed by a qualified electrician.

  1. Mount ceiling plate to a reinforced ceiling, using the appropriate screws for your ceiling.
  2. Connect the 12 v power supply in the ceiling cup.
  3. Remove the G4 bulbs from their package and carefully push the bulbs into lamp holders.
  4. Now connect the power. Test the lamps.
  5. Raise ceiling cup and fix in place with small grub screws on both sides.
  6. To attach the mesh petal to the electrical assembly, first slide the petal over the electrical cable (through The slot in the petal’s collar).
  7. Now lower the petal over the g4 lamp housing until it rests in position on the lip.
  8. You can rotate the petal towards any direction of your choosing.
  9. Repeat steps 6-8 for the second petal. The ideal height between petals should be 200mm.
  10. Now your installation is complete! ENJOY

Caution

The lampshade is made of delicate fine anodised aluminium mesh which maintains its’ form by a tension created between the structural rings. Any excessive force can change this form and damage the lamp shade permanently.

Do not press (with any force) onto the material with any sharp / hard objects. This may cause a dent or scratch that cannot be removed due to the “memory” feature of the metal mesh. Handle the lamp shade with care only with you bare hands. When removing it from the box hold it only at the outer or inner rings.

NEVER HOLD THE MESH SHADE AT THE MESH SECTION, HOLD ONLY THE CENTRAL PIECE.

Maintenance

Cleaning

To clean the lamp shade of loose dust or fallen articles, simply blow the lamp with a hairdryer on a medium or cool heat from the underside of the lamp, blowing the dust outwards and away from the lamp. For heavier dust, use a spray bottle with 90% water mixed with 10% alcohol. Once you have sprayed the lamp with fine mist, blow dry with a hairdryer. The evaporating water loosens and carries the dust away.

Always hold the lamp shade at the outer ring, or wire neck ‘cage’ and do not grip the product on its’ mesh surface. If a stain is stubborn, use a small amount of acetone and clean gently with smooth cloth or small soft brush without exerting pressure on the mesh.

Replacing the bulb

Unscrew the frosted diffuser to access the G4 LED bulb. Pull the bulb straight down and out of the lamp base (it does not turn in and out). Screw diffuser back in. We recommend using an LED G4 lamp which should last 5 years.

Downloads

Spec Sheet (PDF – 150kb)

Installation Guide (PDF – 0.5mb)

High Resolution Image (JPG – 0.7mb)

3d Models (STP -ZIP Archive – 2mb)