Water Lily Lamp 550

The Water Lily lamp floats overhead, an organic form allowing the metal textile to express itself beautifully. Exquisite on their own or hung in a group. Our lamps are designed for indoor use.



Categories: , SKU: WL-550

Additional information

Weight 1.3 kg
Dimensions 59 × 57 × 17 cm

Shades of Bronze, Shades of Denim, Shades of Pale Gold, Shades of Pale Pink


Anodised Aluminium Mesh

Cup Diameter


Shade Height


Shade Width


Shade Depth


Lamp Weight





Indoor Use Only

Globe Type


Luminaire Standard

IEC 60598-1:2008 CLASS II : IP20 G9 CERAMIC LAMPHOLDER; G9 Bulb warm white, Dimmable ,MAX 5 Watt, 220 -240 Volt*, * Can be modified for 110V

Power Supply





Please refer to the ceiling plan for your installation arrangement. The lamps should be installed by a qualified electrician. The electrician should use the appropriate dimmer if dimmable LED lamps are used (recommended).

  1. First loosen the plastic grub screw in the ceiling plate and make sure the electrical cable is the correct
    length. Tighten the grub screw again.
  2. Mount the ceiling plate to the ceiling box. If there is no ceiling box built-in then mount directly to a supported ceiling.
  3. Remove the G9 bulb from its package and carefully push the bulb into lamp holder.
  4. Now connect the power. Test the lamp.
  5. Lift and slot the shade through the cable and slide down onto the lampholder.
  6. Screw the diffuser user back onto the shades’ ‘slotted’ part.
  7. Slide the ceiling cup up the electrical cable flush against the ceiling. Tighten the small grub screw at the bottom of the ceiling cup to fix in place.
  8. Now your installation is complete! ENJOY!


Do not press (with any force) onto the material with any sharp / hard objects. This may cause a dent or scratch that cannot be removed due to the “memory” feature of the metal mesh. Handle the lamp shade with care only with you bare hands. When removing it from the box hold it only at the outer or inner rings.


To clean the lamp shade of loose dust or fallen articles, simply blow the lamp with a hairdryer on a medium or cool heat from the underside of the lamp, blowing the dust outwards and away from the lamp. For heavier dust, use a spray bottle with 90% water mixed with 10% alcohol. Once you have sprayed the lamp with finr mist, blow dry with a hairdryer. The evaporating water loosens and carries the dust away.

Always hold the lamp shade at the outer ring, or wire neck ‘cage’ and do not grip the product on its’ mesh surface. If a stain is stubborn, use a small amount of acetone and clean gently with smooth cloth or small soft brush without exerting pressure on the mesh.

Replacing the bulb
Slide the shade up above the G9 lamp cover to access the bulb. Now remove the G9 bulb out of the ceramic base by pulling straight down (not screwing). We recommend using a dimmable frosted LED lamp which lasts approximately five years or longer if dimmed.


Spec Sheet (PDF – 345kb)

Installation Guide (PDF – 500kb)

3d Models (STP -ZIP Archive – 2mb)